The Pfaff 130 has a dual needle capability and ingenious decorative needle stitch using the special attachment (50010) allows for additional 53 different decorative stitches making this a truly versatile workhorse of a machine.
The Pfaff 230 was originally designed as the replacement for the 130. The differences include the use of more alloys to reduce weight in the machine; a redesigned cam system to an internal design above the needle bar drive; light moved over the throat with a swing down mechanism to allow for bulb changes; rotary dial stitch length with a preset length and an added needle threader.
The Pfaff 260 has an upgraded motor from the 230 and the largest motor made for all these machines. In addition the knobs were made larger and easier to grasp.
The Pfaff 332 was originally designed as an upgrade for the 230. The 332 features a free arm with a collapsible table along with a redesigned tension system, internal motor with a cleated belt along with needle threader changes and added capacity for load handling. This 332 has a powerful 1.3 amp motor which was about 2 times the power of the average Singer of that era. With the embroidery upgrade on the 332 you can create an additional 53 decorative stitches.
The Pfaff 360 has additional features of automatic needle threader, double and triple needle capability along with 80 additional decorative stitches and variations.
PFAFF 260
THIS IS A EXCELLENT PFAFF 260 SEWING MACHINE
INDUSTRIAL STRENGTH 
FULLY SERVICED WITH WARRANTY 
FULLY LOADED!!
THIS SOLID, POWERFUL MACHINE WAS FIRST INTRODUCED IN THE 1950'S & WAS THE FIRST SEMI-INDUSTRIAL SEWING MACHINE FOR HOME USE. IT'S A POWERFUL STRAIGHT & ZIGZAG MACHINE THAT ALSO DOES 53 DIFFERENT STITCHES--THIS PFAFF 260 HAS SURVIVED THE TEST OF TIME.
ORIGINALLY DESIGNED AS A LATER GENERATION OF THE 130, THE 260 USES MORE ALLOYS TO REDUCE THE WEIGHT OF THE MACHINE. IN ADDITION THE CAM SYSTEM WAS MOVED FROM THE BACK OF THE MACHINE TO AN INTERNAL DESIGN ABOVE THE NEEDLE BAR DRIVE. EXTERNALLY SEVERAL DESIGN CHANGES WHERE INCORPORATED IN THE 260. THE LIGHT WAS MOVED INTERNALLY OVER THE THROAT, WITH A SWING DOWN MECHANISM TO CHANGE THE BULB. THE STITCH LENGTH AND WIDTH WERE CHANGED TO A ROTARY DIAL, AND A NEEDLE THREADER WAS ADDED. OVERALL, A MUCH IMPROVED VERSION OF THE 130. THIS PARTICULAR 260 HAS THE PE TYPE MOTOR. THIS WAS THE LARGER, MORE POWERFUL VARIANT THE MOUNTS THE MOTOR UNDERNEATH THE BED. IT WAS SEAMSTRESS TYPE OPTION TO REMOVE THE MOTOR FROM THE BACK OF THE MACHINE TO UNDERNEATH TO KEEP ARTICLES FROM GETTING CAUGHT ON IT
HAS JUST BEEN FULLY SERVICED BY SEW TECHNOLOGIES
MACHINE IS DISASSEMBLED, CLEANED, ADJUSTED AND REFURBISHED
START OF THE REBUILD PROCESS
HEAD DURING REBUILD
PRESSER FOOT REBUILT
BOBBIN ASSEMBLY REBUILT
TENSIONER REBUILT
HOOK AND FEED DOG ASSEMBLY REBUILT
DECORATIVE STITCH CAM ASSEMBLY REBUILT
MOTOR REBUILT
ARMATURE AFTER RESURFACING
EXTENSION DRIVE ASSEMBLY
BOBBIN WINDER REBUILT
DRIVE GEARS CLEANED AND RE-LUBED
RUN OUT ADJUSTED
NEEDLE THREADER CLEANED AND ADJUSTED...WORKS GREAT
ALL ELECTRICAL IS RE- WIRED
FOOT PEDAL REBUILT
CLEATED BELT REPLACED
FEED DOG DROP MECHANISM CLEANED AND SERVICED
FULL ADJUSTMENT OF MACHINE
CLEATED BELTS REPLACED
FEATURES:
POWER--FEATURES A 1.3 AMP MOTOR--ABOUT 2 TIMES THE POWER OF THE AVERAGE SINGER OF THAT ERA. ALSO MOTOR USES A VERY HIGH COPPER CONTENT WINDING TO GIVE THE POWER OF A MUCH LARGER MOTOR.
ADJUSTABLE STITCH LENGTH OF BOTH WIDTH & LENGTH TO GIVE YOU FULL CONTROL OVER SPACING & STRENGTH OF STITCH
ADJUSTABLE TENSION SYSTEM - DOUBLE NEEDLE CAPABILITY, EXCLUSIVE PFAFF DESIGN TENSION KNOB
VERSATILE--WILL SEW JUST ABOUT ANYTHING THAT FITS UNDER THE FOOT--TAKES UP TO #18 NEEDLE & A #69 THREAD --WILL GO TO A #92 THREAD IF TENSIONS ARE RESET
EMBROIDERY UPGRADE--WITH THIS PFAFF ''EMBROIDERY UPGRADE" YOU CAN CREATE 53 SEPARATE STITCHES
RELIABILITY-- METAL CONSTRUCTION & PFAFF LEGENDARY QUALITY ARE EVIDENT THROUGHOUT THIS MACHINE
FEED DOGS--CAN BE EASILY ADJUSTED FOR FREEHAND QUILTING & DARNING
PRESSURE FOOT--ADJUSTABLE FOR WIDE RANGE OF MATERIALS
RESTORATION--COMPLETE CLEANING INTERNALLY --NEEDLE HOOK TIMING SET--PRESSER BAR SET--FEED HEIGHT ADJUSTED--ALL TIMINGS ADJUSTED--MOTOR RESTORED, DISASSEMBLED, CLEANED, LUBED,NEW BRUSHES & BUSHINGS---TENSIONER REBUILT AND ADJUSTED--NEW BELT & TIRE--FOOT PEDAL REBUILT, ETC.
LOOK HOW CLEAN THE MECHANICALS ARE
ITS A MACHINE YOU WILL CHERISH FOR GENERATIONS
SEWING THRU 6 LAYERS OF LEATHER
5 LAYERS OF SUEDE
8 LAYERS OF UPHOLSTERY
8 LAYERS OF CANVAS
4 LAYERS OF VINYL
INCLUDES:
8 BOBBINS
RUFFLER FOOT
ZIG ZAG FOOT
3 ROLLED HEMMER FOOT
DARNING FOOT
FELLER FOOT
STRAIGHT STITCH FOOT
ZIPPER FOOT
BUTTON FOOT
EMBROIDERY FOOT
SEAM GUIDE
FOOT CONTROL
MANUAL
DECORATIVE STITCH WHEEL
SAMPLE OF A FEW OF THE STITCHES THIS MACHINE WILL DO
OTHER SIDE
SAMPLE SEW WITH TWO DIFFERENT COLOR THREADS
THIS BEAUTY WILL SEW 53 DIFFERENT STITCHES!!!
SERIAL NUMBER 7481916
INCLUDES 90 DAY PARTS AND LABOR WARRANTY
NOTE ABOUT INDUSTRIAL MACHINES
WHAT WE CONSIDER INDUSTRIAL STRENGTH HAS TO PASS THE FOLLOWING CRITERIA.
1) ALL METAL CONSTRUCTION. ALL DRIVE COMPONENT'S MUST BE A STEEL OR METAL ALLOY
2) HAS A MINIMUM PRESSER FOOT CLEARANCE OF 5/16" AND WILL SEW VIRTUALLY ANY FABRIC THAT WILL FIT IN THAT SPACE
3) INTERNAL MOTOR SYSTEM
THIS DIFFERS FROM A TRUE INDUSTRIAL MACHINE BY THE FOLLOWING
1) DOES NOT WEIGH 200LBS AND TAKE UP A 2 FT BY 5FT SPACE
2) DOES NOT HAVE AN EXTERNAL BELT DRIVEN MOTOR THAT IS MANY TIMES 220V POWER
3) DOES NOT HAVE AN OIL PAN AND PUMP TO CIRCULATE OIL IN THE HEAD OF MACHINE THAT MUST BE CHANGED ON A REGULAR BASIS
4) IS NOT DIFFICULT TO CONTROL AND SLOW SPEEDS (MOST INDUSTRIAL MACHINES ARE DESIGNED TO OPERATE AT VERY HIGH SPEEDS)
THIS IS A EXCELLENT PFAFF 130 SEWING MACHINE
INDUSTRIAL STRENGTH W/ EMBROIDERY UPGRADE
PLUS FULLY SERVICED WITH WARRANTY & DIAL A STITCH OPTION--
FULLY LOADED!!
THIS SOLID, POWERFUL MACHINE WAS FIRST INTRODUCED IN THE 1950'S & WAS THE FIRST SEMI-INDUSTRIAL SEWING MACHINE FOR HOME USE. IT'S A POWERFUL STRAIGHT & ZIGZAG MACHINE W/ SPECIAL ATTACHMENT (50010) THAT ALLOWS IT TO SEW 53 DIFFERENT STITCHES--THIS PFAFF 130 HAS SURVIVED THE TEST OF TIME. MOST 130'S ARE PASSED FROM GENERATION TO GENERATION AND NEVER MAKE IT TO THE SECONDARY MARKET. THEY ARE THE EPITOME OF PRECISION GERMAN DESIGN. DUAL NEEDLE CAPABILITY, AND AN INGENIOUS DECORATIVE NEEDLE OPTION, MAKE THIS A TRULY VERSATILE WORKHORSE
HAS JUST BEEN FULLY SERVICED BY SEW TECHNOLOGIES
PAINT AND DECALS ARE EXCELLENT WITH JUST A FEW NICKS AND SCRATCHES ON BED
MACHINE IS DISASSEMBLED, CLEANED, ADJUSTED AND REFURBISHED
START OF THE REBUILD PROCESS
HEAD DURING REBUILD
PRESSER FOOT REBUILT
LOWER END AFTER DIS-ASSEMBLY
ZIGZAG MECHANISM REBUILT
TENSIONER REBUILT
HOOK AND FEED DOG ASSEMBLY REBUILT
RUN OUT SET
FEED DOG DOG DROP MECHANISM CLEANED AND SERVICED
DECORATIVE STITCH CAM ASSEMBLY REBUILT
MOTOR REBUILT
NEEDLE BAR
ALL ELECTRICAL IS WIRING REPLACED
NEW FOOT PEDAL
CLEATED BELT REPLACED
FULL ADJUSTMENT OF MACHINE
FEATURES:
POWER--FEATURES A 1.3 AMP MOTOR--ABOUT 2 TIMES THE POWER OF THE AVERAGE SINGER OF THAT ERA. ALSO MOTOR USES A VERY HIGH COPPER CONTENT WINDING TO GIVE THE POWER OF A MUCH LARGER MOTOR.
ADJUSTABLE STITCH LENGTH OF BOTH WIDTH & LENGTH TO GIVE YOU FULL CONTROL OVER SPACING & STRENGTH OF STITCH
VERSATILE--WILL SEW JUST ABOUT ANYTHING THAT FITS UNDER THE FOOT--TAKES TO T A #18 NEEDLE & A #69 THREAD --WILL GO TO A #92 THREAD IF TENSIONS ARE RESET
EMBROIDERY UPGRADE--WITH THIS PFAFF ''EMBROIDERY UPGRADE" YOU CAN CREATE 53 SEPARATE STITCHES JUST BY MOVING 3 LEVERS
RELIABILITY--ALL METAL CONSTRUCTION & PFAFF LEGENDARY QUALITY ARE EVIDENT THROUGHOUT THIS MACHINE
SPRING TENSION--SMALL THUMB LEVER EASILY CHANGES TO ADJUST FOR DARNING OR SEWING HEAVY MATERIAL
FEED DOGS--CAN BE EASILY ADJUSTED FOR FREEHAND QUILTING & DARNING
PRESSURE FOOT--ADJUSTABLE FROM WIDE RANGE OF MATERIALS
ADJUSTABLE LIGHT-- BRIGHT EASY TO POSITION LIGHT--SEPARATE ON/OFF SWITCH
RESTORATION--COMPLETE CLEANING INTERNALLY --NEEDLE HOOK TIMING SET--PRESSER BAR SET--FEED HEIGHT ADJUSTED--ALL TIMINGS ADJUSTED--MOTOR RESTORED, DISASSEMBLED, CLEANED, LUBED,NEW BRUSHES & BUSHINGS---TENSIONER REBUILT AND ADJUSTED--NEW BELT & TIRE--FOOT PEDAL REBUILT, ETC.
LOOK HOW CLEAN THE MECHANICALS ARE
I CAN'T SAY ENOUGH ABOUT THE BEAUTY AND RELIABILITY OF THIS MACHINE. ITS A MACHINE YOU WILL CHERISH FOR GENERATIONS
LOOK AT THE SHINE ON THIS MACHINE
INCLUDES:
HEMMER FOOT
ZIPPER FOOT
ZIG ZAG FOOT
ROLLED HEMMER FOOT
LARGE DARNING FOOT
BUTTON HOLE FOOT
BUTTON FOOT
STRAIGHT STITCH FOOT
QUILTING FOOT
FLAT FELLER FOOT
BINDER FOOT
ADJUSTABLE HEMMER FOOT
INVISABLE ZIPPER FOOT
TRANSVERSE SPOOL HOLDER
FOOT CONTROL
7 BOBBINS
MANUAL
DECORATIVE STITCH WHEEL
SAMPLE OF A FEW OF THE STITCHES THIS MACHINE WILL DO
BACK SIDE
THIS BEAUTY WILL SEW 53 DIFFERENT STITCHES!!!
SAMPLE STITCHES FROM BOTH SIDES WITH TWO DIFFERENT COLOR THREADS
EXCELLENT MACHINE
SOME VERY SCRATCHES IN FRONT OF THE NEEDLE PLATE...OVERALL CONDITION OF PAINT IS EXCELLENT.. FINISH IS LIKE A MIRROR
INCLUDES 90 DAY PARTS AND LABOR WARRANTY
NOTE ABOUT INDUSTRIAL MACHINES
WHAT WE CONSIDER INDUSTRIAL STRENGTH HAS TO PASS THE FOLLOWING CRITERIA.
1) ALL METAL CONSTRUCTION. ALL DRIVE COMPONENT'S MUST BE A STEEL OR METAL ALLOY
2) HAS A MINIMUM PRESSER FOOT CLEARANCE OF 5/16" AND WILL SEW VIRTUALLY ANY FABRIC THAT WILL FIT IN THAT SPACE
3) INTERNAL MOTOR SYSTEM
THIS DIFFERS FROM A TRUE INDUSTRIAL MACHINE BY THE FOLLOWING
1) DOES NOT WEIGH 200LBS AND TAKE UP A 2 FT BY 5FT SPACE
2) DOES NOT HAVE AN EXTERNAL BELT DRIVEN MOTOR THAT IS MANY TIMES 220V POWER
3) DOES NOT HAVE AN OIL PAN AND PUMP TO CIRCULATE OIL IN THE HEAD OF MACHINE THAT MUST BE CHANGED ON A REGULAR BASIS
4) IS NOT DIFFICULT TO CONTROL AND SLOW SPEEDS (MOST INDUSTRIAL MACHINES ARE DESIGNED TO OPERATE AT VERY HIGH SPEEDS)
EXCELLENT PFAFF 332
THIS IS A EXCELLENT PFAFF 332 SEWING MACHINE
INDUSTRIAL STRENGTH
FULLY SERVICED WITH WARRANTY
FULLY LOADED!!
THIS SOLID, POWERFUL MACHINE WAS FIRST INTRODUCED IN THE 1950'S & WAS THE FIRST SEMI-INDUSTRIAL SEWING MACHINE FOR HOME USE. IT'S A POWERFUL STRAIGHT & ZIGZAG MACHINE THAT ALSO DOES 53 DIFFERENT STITCHES--THIS PFAFF 332 HAS SURVIVED THE TEST OF TIME.
ORIGINALLY DESIGNED AS AN UPGRADE FOR THE 230, THE 332 HAS A FREE ARM WITH A COLLAPSIBLE TABLE. IN ADDITION THE TENSION SYSTEM WAS REDESIGNED FOR EASIER USE AND RELIABILITY. THE MOTOR WAS CHANGED TO AN INTERNAL DESIGN, WITH A CLEATED BELT DRIVE, INSTEAD OF THE EXTERNAL RUBBER BELT DRIVE OF THE 230. THE NEEDLE THREADER WAS CHANGED SLIGHTLY, AND A CAPACITOR WAS ADDED TO THE MOTOR FOR LOAD HANDLING
MACHINE IS DISASSEMBLED, CLEANED, ADJUSTED AND REFURBISHED
START OF THE REBUILD PROCESS
PRESSER FOOT REBUILT
BOBBIN ASSEMBLY REBUILT
ZIGZAG MECHANISM REBUILT
TENSIONER REBUILT
FEED DOG ASSEMBLY REBUILT
DECORATIVE STITCH CAM ASSEMBLY REBUILT
MOTOR REBUILT
ARMATURE AFTER RESURFACING
BOBBIN WINDER REBUILT
STOP ASSEMBLY
PATTERN LENGTH LEVER
RUN OUT ADJUSTED
LOWER END SERVICED
FEED DOG DROP MECHANISM
ALL ELECTRICAL IS CHECKED AND WIRING REPLACED WHERE NEEDED
FOOT PEDAL REBUILT
GEARS REPACKED
FULL ADJUSTMENT OF MACHINE
FEATURES:
POWER--FEATURES A 1.3 AMP MOTOR--ABOUT 2 TIMES THE POWER OF THE AVERAGE SINGER OF THAT ERA. ALSO MOTOR USES A VERY HIGH COPPER CONTENT WINDING TO GIVE THE POWER OF A MUCH LARGER MOTOR.
ADJUSTABLE STITCH LENGTH OF BOTH WIDTH & LENGTH TO GIVE YOU FULL CONTROL OVER SPACING & STRENGTH OF STITCH
ADJUSTABLE TENSION SYSTEM - DOUBLE NEEDLE CAPABILITY, EXCLUSIVE PFAFF DESIGN TENSION KNOB
VERSATILE--WILL SEW JUST ABOUT ANYTHING THAT FITS UNDER THE FOOT--TAKES UP TO #18 NEEDLE & A #69 THREAD --WILL GO TO A #92 THREAD IF TENSIONS ARE RESET
EMBROIDERY UPGRADE--WITH THIS PFAFF ''EMBROIDERY UPGRADE" YOU CAN CREATE 53 SEPARATE STITCHES
RELIABILITY-- METAL CONSTRUCTION & PFAFF LEGENDARY QUALITY ARE EVIDENT THROUGHOUT THIS MACHINE
FEED DOGS--CAN BE EASILY ADJUSTED FOR FREEHAND QUILTING & DARNING
PRESSURE FOOT--ADJUSTABLE FOR WIDE RANGE OF MATERIALS
RESTORATION--COMPLETE CLEANING INTERNALLY --NEEDLE HOOK TIMING SET--PRESSER BAR SET--FEED HEIGHT ADJUSTED--ALL TIMINGS ADJUSTED--MOTOR RESTORED, DISASSEMBLED, CLEANED, LUBED,NEW BRUSHES & BUSHINGS---TENSIONER REBUILT AND ADJUSTED--NEW BELT & TIRE--FOOT PEDAL REBUILT, ETC.
LOOK HOW CLEAN THE MECHANICALS ARE
+++++++++++
ITS A MACHINE YOU WILL CHERISH FOR GENERATIONS
8 LAYERS OF DENIM
5 LAYERS OF SUEDE
8 LAYERS OF UPHOLSTERY
8 LAYERS OF CANVAS
INCLUDES:
6 BOBBINS
ZIG ZAG FOOT
2 ROLLED HEMMER FOOT
STRAIGHT STITCH FOOT
RUFFLER FOOT
EMBROIDERY FOOT
BINDER FOOT
FOOT CONTROL
MANUAL
DECORATIVE STITCH WHEEL
.....GREAT LITTLE MACHINE
SAMPLE OF A FEW OF THE STITCHES THIS MACHINE WILL DO
OTHER SIDE
SAMPLE SEW WITH TWO DIFFERENT COLOR THREADS
THIS BEAUTY WILL SEW 53 DIFFERENT STITCHES!!!
INCLUDES 90 DAY PARTS AND LABOR WARRANTY
NOTE ABOUT INDUSTRIAL MACHINES
WHAT WE CONSIDER INDUSTRIAL STRENGTH HAS TO PASS THE FOLLOWING CRITERIA.
1) ALL METAL CONSTRUCTION. ALL DRIVE COMPONENT'S MUST BE A STEEL OR METAL ALLOY
2) HAS A MINIMUM PRESSER FOOT CLEARANCE OF 5/16" AND WILL SEW VIRTUALLY ANY FABRIC THAT WILL FIT IN THAT SPACE
3) INTERNAL MOTOR SYSTEM
THIS DIFFERS FROM A TRUE INDUSTRIAL MACHINE BY THE FOLLOWING
1) DOES NOT WEIGH 200LBS AND TAKE UP A 2 FT BY 5FT SPACE
2) DOES NOT HAVE AN EXTERNAL BELT DRIVEN MOTOR THAT IS MANY TIMES 220V POWER
3) DOES NOT HAVE AN OIL PAN AND PUMP TO CIRCULATE OIL IN THE HEAD OF MACHINE THAT MUST BE CHANGED ON A REGULAR BASIS
4) IS NOT DIFFICULT TO CONTROL AND SLOW SPEEDS (MOST INDUSTRIAL MACHINES ARE DESIGNED TO OPERATE AT VERY HIGH SPEEDS)
PFAFF 260
THIS IS A EXCELLENT PFAFF 260 SEWING MACHINE
INDUSTRIAL STRENGTH
FULLY SERVICED WITH WARRANTY
FULLY LOADED!!
THIS SOLID, POWERFUL MACHINE WAS FIRST INTRODUCED IN THE 1950'S & WAS THE FIRST SEMI-INDUSTRIAL SEWING MACHINE FOR HOME USE. IT'S A POWERFUL STRAIGHT & ZIGZAG MACHINE THAT ALSO DOES 53 DIFFERENT STITCHES--THIS PFAFF 260 HAS SURVIVED THE TEST OF TIME.
ORIGINALLY DESIGNED AS A LATER GENERATION OF THE 130, THE 260 USES MORE ALLOYS TO REDUCE THE WEIGHT OF THE MACHINE. IN ADDITION THE CAM SYSTEM WAS MOVED FROM THE BACK OF THE MACHINE TO AN INTERNAL DESIGN ABOVE THE NEEDLE BAR DRIVE. EXTERNALLY SEVERAL DESIGN CHANGES WHERE INCORPORATED IN THE 260. THE LIGHT WAS MOVED INTERNALLY OVER THE THROAT, WITH A SWING DOWN MECHANISM TO CHANGE THE BULB. THE STITCH LENGTH AND WIDTH WERE CHANGED TO A ROTARY DIAL, AND A NEEDLE THREADER WAS ADDED. OVERALL, A MUCH IMPROVED VERSION OF THE 130. THIS PARTICULAR 260 HAS THE PE TYPE MOTOR. THIS WAS THE LARGER, MORE POWERFUL VARIANT THE MOUNTS THE MOTOR UNDERNEATH THE BED. IT WAS SEAMSTRESS TYPE OPTION TO REMOVE THE MOTOR FROM THE BACK OF THE MACHINE TO UNDERNEATH TO KEEP ARTICLES FROM GETTING CAUGHT ON IT
HAS JUST BEEN FULLY SERVICED BY SEW TECHNOLOGIES
MACHINE IS DISASSEMBLED, CLEANED, ADJUSTED AND REFURBISHED
START OF THE REBUILD PROCESS
HEAD DURING REBUILD
PRESSER FOOT REBUILT
BOBBIN ASSEMBLY REBUILT
TENSIONER REBUILT
HOOK AND FEED DOG ASSEMBLY REBUILT
DECORATIVE STITCH CAM ASSEMBLY REBUILT
MOTOR REBUILT
ARMATURE AFTER RESURFACING
EXTENSION DRIVE ASSEMBLY
BOBBIN WINDER REBUILT
DRIVE GEARS CLEANED AND RE-LUBED
RUN OUT ADJUSTED
NEEDLE THREADER CLEANED AND ADJUSTED...WORKS GREAT
ALL ELECTRICAL IS RE- WIRED
FOOT PEDAL REBUILT
CLEATED BELT REPLACED
FEED DOG DROP MECHANISM CLEANED AND SERVICED
FULL ADJUSTMENT OF MACHINE
CLEATED BELTS REPLACED
FEATURES:
POWER--FEATURES A 1.3 AMP MOTOR--ABOUT 2 TIMES THE POWER OF THE AVERAGE SINGER OF THAT ERA. ALSO MOTOR USES A VERY HIGH COPPER CONTENT WINDING TO GIVE THE POWER OF A MUCH LARGER MOTOR.
ADJUSTABLE STITCH LENGTH OF BOTH WIDTH & LENGTH TO GIVE YOU FULL CONTROL OVER SPACING & STRENGTH OF STITCH
ADJUSTABLE TENSION SYSTEM - DOUBLE NEEDLE CAPABILITY, EXCLUSIVE PFAFF DESIGN TENSION KNOB
VERSATILE--WILL SEW JUST ABOUT ANYTHING THAT FITS UNDER THE FOOT--TAKES UP TO #18 NEEDLE & A #69 THREAD --WILL GO TO A #92 THREAD IF TENSIONS ARE RESET
EMBROIDERY UPGRADE--WITH THIS PFAFF ''EMBROIDERY UPGRADE" YOU CAN CREATE 53 SEPARATE STITCHES
RELIABILITY-- METAL CONSTRUCTION & PFAFF LEGENDARY QUALITY ARE EVIDENT THROUGHOUT THIS MACHINE
FEED DOGS--CAN BE EASILY ADJUSTED FOR FREEHAND QUILTING & DARNING
PRESSURE FOOT--ADJUSTABLE FOR WIDE RANGE OF MATERIALS
RESTORATION--COMPLETE CLEANING INTERNALLY --NEEDLE HOOK TIMING SET--PRESSER BAR SET--FEED HEIGHT ADJUSTED--ALL TIMINGS ADJUSTED--MOTOR RESTORED, DISASSEMBLED, CLEANED, LUBED,NEW BRUSHES & BUSHINGS---TENSIONER REBUILT AND ADJUSTED--NEW BELT & TIRE--FOOT PEDAL REBUILT, ETC.
LOOK HOW CLEAN THE MECHANICALS ARE
ITS A MACHINE YOU WILL CHERISH FOR GENERATIONS
SEWING THRU 6 LAYERS OF LEATHER
5 LAYERS OF SUEDE
8 LAYERS OF UPHOLSTERY
8 LAYERS OF CANVAS
4 LAYERS OF VINYL
INCLUDES:
5 BOBBINS
RUFFLER FOOT
ZIG ZAG FOOT
2 ROLLED HEMMER FOOT
DARNING FOOT
FELLER FOOT
STRAIGHT STITCH FOOT
ZIPPER FOOT
SEAM GUIDE
FOOT CONTROL
MANUAL
DECORATIVE STITCH WHEEL
SAMPLE OF A FEW OF THE STITCHES THIS MACHINE WILL DO
OTHER SIDE
SAMPLE SEW WITH TWO DIFFERENT COLOR THREADS
THIS BEAUTY WILL SEW 53 DIFFERENT STITCHES!!!
6917354
INCLUDES 90 DAY PARTS AND LABOR WARRANTY
NOTE ABOUT INDUSTRIAL MACHINES
WHAT WE CONSIDER INDUSTRIAL STRENGTH HAS TO PASS THE FOLLOWING CRITERIA.
1) ALL METAL CONSTRUCTION. ALL DRIVE COMPONENT'S MUST BE A STEEL OR METAL ALLOY
2) HAS A MINIMUM PRESSER FOOT CLEARANCE OF 5/16" AND WILL SEW VIRTUALLY ANY FABRIC THAT WILL FIT IN THAT SPACE
3) INTERNAL MOTOR SYSTEM
THIS DIFFERS FROM A TRUE INDUSTRIAL MACHINE BY THE FOLLOWING
1) DOES NOT WEIGH 200LBS AND TAKE UP A 2 FT BY 5FT SPACE
2) DOES NOT HAVE AN EXTERNAL BELT DRIVEN MOTOR THAT IS MANY TIMES 220V POWER
3) DOES NOT HAVE AN OIL PAN AND PUMP TO CIRCULATE OIL IN THE HEAD OF MACHINE THAT MUST BE CHANGED ON A REGULAR BASIS
4) IS NOT DIFFICULT TO CONTROL AND SLOW SPEEDS (MOST INDUSTRIAL MACHINES ARE DESIGNED TO OPERATE AT VERY HIGH SPEEDS)
YOU WILL NOT BELIEVE THE POWER THESE MACHINES HAVE
This machine runs very smoothly despite its industrial strength. It is one of the most versatile PFAFFS ever made. It easy sews thru leather, and well as perfect stitches in delicate silks. The automatic bobbin winder is fully operational and the feed/needle plate assembly is in perfect working condition.
Characteristics/Feature's :
- built-in bobbin winder
- adjustable stitch length system
- adjustable tension system
- forward and reverse lever
-automatic needle threader
- on/off power light switch
-double and triple needle capable
- built-in light
- New cleated belts
-Internal cam system for multiple built in stitches
- adjustable pressure foot system
- rotary hook
-80 Different stitches variations
- original foot control
- all metal construction
- weight : approx. 28 pounds
HAS JUST BEEN FULLY SERVICED BY SEW TECHNOLOGIES INCLUDING:
FULL CLEANING OF MACHINE AND RE-GREASE AND LUBRICATION OF ALL MOVING PARTS
THE START OF THE RESTORATION PROCESS
ALL WEAR POINTS MAGNIFLUXED* AND CHECKED AGAINST NEW SPECS.
Motor was removed, armature cleaned, brushes replaced
ALL WIRING AND ELECTRICAL COMPONENTS INSPECTED AND REPLACED
ALL RUBBER, FELT AND WEAR COMPONENTS REPLACED
DECORATIVE STITCH DRIVE REMOVED CLEANED AND ADJUSTED
FEED DOGS REPLACED,HOOK ASSEMBLE REBUILT
TENSIONER REBUILT
ALL NEW WIRING
COMPLETE ADJUSTMENT OF MACHINE
AFTER CLEANING AND ASSEMBLY
IF YOU ARE IN THE MARKET FOR A LIKE NEW PFAFF 360 THIS IS IT
SAMPLE STITCHES FROM BOTH SIDES WITH TWO DIFFERENT COLOR THREADS
ACCESSORIES INCLUDED WITH CASE:
7 BOBBINS
ALL PURPOSE FOOT
LARGE DARNING FOOT
BUTTONHOLE FOOT
BUTTON FOOT
ZIPPER FOOT
ZIG ZAG FOOT
2 ROLLED HEMMER FOOT
EMBROIDERY FOOT
FELLER FOOT
STRAIGHT STITCH FOOT
MEDIUM DARNING FOOT
SMALL DARNING FOOT
SHIRRING FOOT
SCREWDRIVER
RULER
FOOT CONTROL
STITCH SELECTOR WHEEL
MANUAL
ACCESSORY CASE
SERIAL #6818050
NOTE ABOUT INDUSTRIAL MACHINES
WHAT WE CONSIDER INDUSTRIAL STRENGTH HAS TO PASS THE FOLLOWING CRITERIA.
1) ALL METAL CONSTRUCTION. ALL DRIVE COMPONENTS MUST BE A STEEL OR METAL ALLOY
2) HAS A MINIMUM PRESSER FOOT CLEARANCE OF 5/16" AND WILL SEW VIRTUALLY ANY FABRIC THAT WILL FIT IN THAT SPACE
3) INTERNAL MOTOR SYSTEM
THIS DIFFERS FROM A TRUE INDUSTRIAL MACHINE BY THE FOLLOWING
1) DOES NOT WEIGH 200LBS AND TAKE UP A 2 FT BY 5FT SPACE
2) DOES NOT HAVE AN EXTERNAL BELT DRIVEN MOTOR THAT IS MANY TIMES 220V POWER
3) DOES NOT HAVE AN OIL PAN AND PUMP TO CIRCULATE OIL IN THE HEAD OF MACHINE THAT MUST BE CHANGED ON A REGULAR BASIS
4) IS NOT DIFFICULT TO CONTROL AND SLOW SPEEDS (MOST INDUSTRIAL MACHINES ARE DESIGNED TO OPERATE AT VERY HIGH SPEEDS)
*Which means all wear and moving parts were removed ...dye checked for micro cracks, inspected for wear, and reinstalled.